Motorola XR450 - RFID Reader - Contactless Integration Manual page 76

4 - 2 XR Series RFID Readers Integrator Guide
Click Communication, the XR Communication Configuration window appears.
5.
XR480 Communication Configuration Window
Figure 4-2
Change communication related settings by entering information in the text boxes or using the drop-down lists.
6.
See Table 4-1
Click Set Properties.
7.
Click Main to return to the Administrator Console main window.
8.
Click Commit / Revert.
9.
Click Commit to save the changes or Discard to discard the changes. See
10.
on page 3-40.
The LLRP specific configuration parameters are separate from other parameters related to communications. The
configurable LLRP parameters on this page are:
LLRP Client Mode:
1.
LLRP Client Mode check box can be checked to operate LLRP in Client mode. If LLRP Client mode is
selected, then LLRPClient IP and LLRPClient/Server Port values will be used to connect to the client.
Allow LLRP to Set Frequencies and LLRP Client/Server Port:
2.
When operating in LLRP server mode, only the LLRP Port value is used as listening port for incoming client
requests. Allow LLRP to Set Frequencies (that can be checked) to allow LLRP client to set single channel
frequency on the reader while performing inventory/access operations. This option is currently available only
with ETSI 302-208 communications standard on EU XR Series readers. These parameters settings will persist
across reader reboots.
LLRP Client IP
3.
The Connect LLRP/Disconnect LLRP buttons will immediately connect/disconnect LLRP from host.
for descriptions of available options.
Committing / Discarding Changes