Yellowstone Tags, Read Lock Options - Motorola XR450 - RFID Reader - Contactless Integration Manual

Xr series rfid readers
Table of Contents

Advertisement

Yellowstone Tags, Read Lock Options

To set the Read Lock Options for Yellowstone tags from the Modify RFID Tags drop down menu, see
1.
3-15 on page
3-14. The set the Yellowstone Tags, Read Lock Options window appears.
Yellowstone Tags, Read Lock Options Window
Figure 3-20
For the tag (on which read lock is to be applied) enter the Tag ID in the Select Tag ID field. Leaving the Select
2.
Tag ID field blank, applies the read lock to all the Yellowstone tags in the vicinity.
Enter the access password if the read lock operation to be performed on currently locked Yellow stone Tags.
3.
Access password "00000000" is used as a default.
Select the antenna port (to use for the read lock operation) from the Read Point drop-down list.
4.
Select the read lock option from the available radio buttons:
5.
• Unlock (tag bank currently unlocked)
• Perma Unlock (permanently unlock the tag bank, it can never be locked)
• Lock (tag bank reading locked)
• Perma Lock (permanently lock the tag bank, it can never be unlocked)
Select the memory bank check box(s) to select which memory bank the lock is applied to. One or more
6.
memory banks can be selected.
Keep Allow reader to switch to Session 0 for read unlock check box selected if a read unlock operation is being
7.
performed.
Click on Submit to perform the read lock operation. The lock option is applied in all of the selected memory
8.
banks.
NOTE For read unlock operation the Allow reader to switch to Session 0 for read unlock option must be
selected, if it is not selected the operation will fail.
Administrator Console 3 - 19
Figure

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr400Xr440Xr480-euXr480-jp

Table of Contents