Motorola XR450 - RFID Reader - Contactless Integration Manual page 34

3 - 6 XR Series RFID Readers Integrator Guide
Reader Status Window Elements
Table 3-1
Item
Device Status Summary of the Reader
Total
Enabled
User Disabled
System Disabled
Parent Disabled
Reader Information
System Clock
System Up Time
CPU Usage
Memory Usage
Flash Usage
Automatic Enable Period
Value Format
Number
Number
Number
Number
Number
[Weekday] [Month] [Day of the Month]
[Hour:Minute:Second] [Year]
[Number of Days] [Number of Hours]
[Number of Minutes] [Number of
Seconds]
Percentage
Number of bytes
Number of bytes
Minutes
Description
Number of readers and read points (antennas) connected. Since a single reader is
connected to the Administrator Console, for the reader this number is 1.
Total number of readers and read points enabled for reading. Since a single reader
is connected to the Administrator Console, for the reader this number is 1 or 0 (if
the reader is disabled).
Number of user-disabled readers and read points. This value is 1 or 0.
For information on how to disable readers, see
page 3-28.
Number of system-disabled readers and read points. If a device becomes
non-operational, the system disables it, but allows other system components to
operate. This value is 1 or 0.
Devices dependent on a non-operational parent device. For example, when a
reader is system-disabled, the read points are marked parent disabled.
The reader system clock time. Click to change the time.
The length of time that the reader has been running.
Percent of CPU used by the user and the system.
Lists the flash usage by the application, Platform and Data partitions: Total amount
allocated, the amount used and the amount of free flash memory.
Lists the flash usage by the application, by the Platform and by the Data: Total
amount of device flash memory. The amount of flash memory used. The amount of
free flash memory. Also broken down by flash partitions (Application, Platform, and
Data).
After the specified number of minutes the system attempts to enable any
system-disabled device. Auto enable is on by default and this setting generates a
log file update each time the system attempts to enable a device.
Configuring Reader Properties on