3 - 18 XR Series RFID Readers Integrator Guide
Configure Yellowstone Tags
The procedures to set the Yellowstone tags include:
•
Set Antenna Configuration
•
Yellowstone Tags, Read Lock Options
Set Antenna Configuration
To Set Antenna Configuration for Yellowstone Tags from the Modify RFID Tags drop down menu, see
1.
3-15 on page
Set Antenna Configuration For Yellowstone Tags Window
Figure 3-19
Enter the tag ID in the Select Tag ID field. This field can be left blank for setting the back scatter strength for all
2.
yellow stone tags in the vicinity.
Enter the access password if the antenna configuration operation to be performed on the Locked Yellow stone
3.
Tags. Access password 00000000 is the default setting.
Select the antenna port to use for the antenna configuration operation from the read point drop-down list.
4.
Select the back scatter strength for Antenna A and Antenna B from the list. For example, [A] Min [B] Off means
5.
set minimum back scatter strength for Antenna A and Zero back scatter strength for Antenna B
3-14. The Set Antenna Configuration For Yellowstone Tags window appears.
Figure