3 - 44 XR Series RFID Readers Integrator Guide
Region Control
If the reader is moved to a different country the Region Control settings must be reset to match the new country of
operation:
From the Maintenance window, click Region Control the Region Control window appears.
1.
Region Control Window
Figure 3-39
The Region Selection must be made before operating the reader in the new country:
2.
Select the appropriate country from the country drop down menu and click on Set Country.
To enable scan mode, click on Enable Scan Mode.
Select the appropriate scan frequency from the drop down menu and click on Set Frequency.
Select the
Click the I understand check box.
Click Commit Region Change to complete the Region Selection.
NOTE The Set Version features are only available only on the EU XR Series readers (EU 302-208).
NOTE Scan Mode is automatically disabled when the EU 302-208 V1.2.1 version is selected.
check box and click Set Version to set the
EU 302-208 V1.2.1
EU 302-208 V1.2.1 version.