Administrator Console
3 - 7
Scan Control
Click Scan Control on the console main menu to view the Scan Control window. Use this window to initiate an on
demand scan and/or to enable/disable polled read points. For periodic read points, the window displays when the
next scan is scheduled.
The polling state displays the current polling setting, Enabled or Disabled.
If Polling is enabled from Admin console then the Polling State: Enabled from Web message is displayed. If polling
is enabled from byte stream then the Polling State: Enabled from byte stream message is displayed
Scan Control Window
Figure 3-7
NOTE To initiate a scan for on-demand read points click Initiate Scan. To enable or disable polling for polled
read points click Enable Polling or Disable Polling.