Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Figure B-13
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves two steps:
•
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer's
Main
Office.
•
Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the
Telecommuter's Home Office
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer's Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
1. Log in to the VPN router at its LAN address of http://192.168.0.1 with its default user name of
admin, and password of password. Select VPN Policies to display the VPN Policies screen.
Click Add Auto Policy to proceed and enter the information.
B-12
configures the NETGEAR ProSafe VPN Client endpoint.
v1.0, March 2010
NETGEAR VPN Configuration