NETGEAR DG834Gv5 User Manual page 119

6. Repeat these steps for the DG834G v5 on LAN B. Pay special attention to the following
network settings:
• General, Remote Address Data (for example, 14.15.16.17)
• Remote LAN, Start IP Address
– IP Address (for example, 192.168.0.1)
– Subnet Mask (for example, 255.255.255.0)
– Pre-shared Key (for example, 12345678)
7. Use the VPN Status screen to activate the VPN tunnel:
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
"Activating a VPN Tunnel" on page 6-25
a. From the main menu, select VPN Status to display the VPN Status/Log screen. Then click
VPN Status to display the Current VPN Tunnels (SAs) screen:
Figure 6-45
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN Status/Log
screen (Figure
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
6-45) to verify that the tunnel is connected.
v1.0, March 2010
for information about the other ways.
6-41