NETGEAR DG834Gv5 User Manual page 121

he following table explains the fields in the VPN Manual Policy screen.
T
Table 6-7. VPN Manual Policy Fields and Settings
Fields and Settings
General
The DG834G v5 VPN
tunnel network
connection fields.
Local LAN
The remote VPN
endpoint must have
these IP addresses
entered as its remote
addresses.
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Description
Policy Name Enter a unique name to identify this policy. This name is not
supplied to the remote VPN endpoint. It is used only to help
you manage the policies.
Remote VPN • The remote VPN endpoint must have this VPN gateway's
Endpoint address entered as its remote VPN endpoint.
• If the remote endpoint has a dynamic IP address, select
Dynamic IP address. No address data input is required.
You can set up multiple remote dynamic IP policies, but only
one such policy can be enabled at a time. Otherwise, select
an option (IP address or domain name) and enter the
address of the remote VPN endpoint to which you want to
connect.
Subnet Mask Enter the network mask.
Single PC - no Select this option if there is no LAN (only a single PC) at the
Subnet remote endpoint. If this option is selected, no additional data is
required.
Single/Start IP • Enter the IP address for a single address, or the starting
Address address for an address range. A single address setting is
used when you want to make a single server on your LAN
available to remote users. A range must be an address
range used on your LAN.
• Any. The remote VPN endpoint may be at any IP address.
Finish IP For an address range, enter the finish IP address. This must
Address be an address range used on your LAN.
v1.0, March 2010
6-43