Changing Your ADSL Settings
Note: For information about how to install ADSL filters, see the NETGEAR Router Setup
Manual.
The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs
use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI)
and virtual channel identifier (VCI).
Note: You must use the Setup Wizard to select the correct country for the default ADSL
settings to work.
If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:
1. From the main menu, select ADSL Settings.
Figure 1-7
2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
3. Type a number between 0 and 255 for the VPI. The default is 8.
4. Type a number between 32 and 65535 for the VCI. The default is 35.
5. Click Apply.
Configuring Your Internet Connection
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
v1.0, March 2010
1-10