Step-By-Step Configuration - NETGEAR DG834Gv5 User Manual

Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Figure B-1
Note: Product updates are available on the NETGEAR website at
http://www.netgear.com.

Step-By-Step Configuration

1. Configure the DG834G v5 as in the gateway-to-gateway procedures using the VPN Wizard
(see "Setting Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:
Unit
DG834G
FVL328
a. Enter toFVL328 for the connection name.
b. Enter 22.23.24.25 for the remote WAN's IP address.
c. Enter the following:
• IP Address: 172.23.9.1
• Subnet Mask: 255.255.255.0
B-2
WAN IP
14.15.16.17
22.13.24.25
v1.0, March 2010
LAN IP
10.5.6.1
172.23.9.1
NETGEAR VPN Configuration
6-18), being certain to
LAN Subnet Mask
255.255.255.0
255.255.255.0