Advanced Wireless Settings For Wps - NETGEAR DG834Gv5 User Manual

2. Configure the network names (SSIDs), select the WPA/PSK + WPA2/PSK radio button on the
Wireless Settings screen (see
Network" on page
passphrase and click Apply. Record this information to add additional clients.
3. For the non-WPS devices that you want to connect, open the networking utility and follow the
utility's instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/
PSK + WPA2/PSK security method, and passphrase).
4. For the WPS devices that you want to connect, follow the procedure
Add a WPS Client" on page 2-11
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the modem router.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the WPS Settings
screen.
5. To view a list of all devices connected to your modem router (including wireless and Ethernet-
connected), see "Viewing Attached Devices" on page

Advanced Wireless Settings for WPS

From the main menu, select Advanced Wireless Settings to display the following screen:
Figure 2-7
The WPS settings show the modem router PIN, and the Keep Existing Wireless Settings check
box.
Configuring Your Wireless Network and Security Settings
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
"Using Push 'N' Connect (WPS) to Configure Your Wireless
2-10). and click Apply. On the WPA/PSK + WPA2/PSK screen, select a
or "Using PIN Entry to Add a WPS Client" on page
v1.0, March 2010
"Using a WPS Button to
4-8.
2-13.
2-15