NETGEAR DG834Gv5 User Manual page 93

In this step, you provide the type of encryption (DES or 3DES) to be used for this connection.
This selection must match your selection in the DG834G v5 configuration.
a. Expand the Key Exchange subheading by double-clicking its name or clicking the +
symbol. Then select Proposal 1 below Key Exchange.
Figure 6-14
b. In the SA Life drop-down list, select Unspecified.
c. In the Compression drop-down list, select None.
d. Select the Encapsulation Protocol (ESP) check box.
e. In the Encrypt Alg drop-down list, select the type of encryption that is configured for the
Encryption Protocol in the DG834G v5 in
Triple DES.
f. In the Hash Alg drop-down list, select SHA-1.
g. In the Encapsulation drop-down list, select Tunnel.
h. Leave the Authentication Protocol (AH) check box cleared.
7. Save the VPN Client Settings.
In the Security Policy Editor window, select File > Save.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN connection when you attempt to access any IP addresses in the range of the
remote VPN router's LAN.
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Table 6-3 on page
v1.0, March 2010
6-6. In this example, use
6-15