NETGEAR DG834Gv5 User Manual page 113

Table 6-5. VPN-Auto Policy Screen Settings (continued)
Fields and Settings
Remote LAN IP Address
The remote
VPN endpoint
must have these
IP addresses
Single/Start IP
entered as its
Address
Local
addresses.
Finish IP
Address
Subnet Mask
IKE Direction
Exchange Mode Ensure that the remote VPN endpoint is set to use Main Mode.
Diffie-Hellman
(DH) Group
Local Identity
Type
Local Identity
Data
Remote Identity
Type
Remote Identity
Data
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Description
Single PC - no Subnet. Select this option if there is no LAN (only a
single PC) at the remote endpoint. If this option is selected, no
additional data is required. The typical application is a PC running the
VPN client at the remote end.
• Enter an IP address that is on the remote LAN. You can use this
setting when you want to access a server on the remote LAN.
• For a range of addresses, enter the starting IP address. This must be
an address range used on the remote LAN.
• Any. Any outgoing traffic from the Local IP computers will trigger an
attempted VPN connection to the remote VPN endpoint. Please be
sure you want this option before selecting it.
Enter the finish IP address for a range of addresses. This must be an
address range used on the remote LAN.
Enter the network mask.
This setting is used when determining if the IKE policy matches the
current traffic. Select an option.
• Responder only. Incoming connections are allowed, but outgoing
connections are blocked.
• Initiator and Responder. Both incoming and outgoing connections
are allowed.
The Diffie-Hellman algorithm is used when exchanging keys. The DH
Group setting determines the number of bit size used in the exchange.
This value must match the value used on the remote VPN gateway.
Select an option to match the Remote Identity Type setting on the
remote VPN endpoint.
.
• WAN IP Address Your Internet IP address.
• Fully Qualified Domain Name. Your domain name.
• Fully Qualified User Name. Your name, e-mail address, or other ID.
Enter the data for the local identity type that you selected. (If WAN IP
Address is selected, no input is required.)
Select the desired option to match the Local Identity Type setting on
the remote VPN endpoint.
• IP Address. The Internet IP address of the remote VPN endpoint.
• Fully Qualified Domain Name. The domain name of the remote
VPN endpoint.
• Fully Qualified User Name. The name, E-mail address, or other ID
of the remote VPN endpoint.
Enter the data for the remote identity type that you selected. If IP
Address is selected, no input is required.
v1.0, March 2010
6-35