Setting Up The Client-To-Gateway Vpn Configuration (Telecommuter Example; Step 1: Configuring The Client-To-Gateway Vpn Tunnel On The Vpn Router At The Employer's Main Office - NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

ADSL2+ Modem Wireless Router DG834G Reference Manual
192.168.0.1/24
Telecommuter Example
LAN IP
192.168.0.1
Router
(at employer's
main office)
Figure B-13
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves two steps:
• Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer's
Main Office.
• Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the
Telecommuter's Home Office
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer's Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
1. Log in to the VPN router at its LAN address of http://192.168.0.1 with its default user name of
admin, and password of password. Select VPN Policies to display the VPN Policies screen.
Click Add Auto Policy to proceed and enter the information.
B-12
Gateway A
WAN IP
FQDN
ntgr.dyndns.org
"fromDG834G.com"
configures the NETGEAR ProSafe VPN Client endpoint.
v2.0, September 2007
NAT Router B
WAN IP
0.0.0.0
"toDG834G.com"
Router
(at telecommuter's
home office)
NETGEAR VPN Configuration
Client B
192.168.2.3
PC
(running NETGEAR
ProSafe VPN Client)