Iii. Camera Setup & Ediview Finder; Iii-1. Ediview Finder Network Camera Setup; Iii-1-1; Windows - Edimax IC-7001W User Manual

III. Camera Setup & EdiView Finder
Your network camera can be up and running in just a few minutes. First,
please follow the instructions below for Windows or Mac in III-1. Installing &
Using EdiView Finder to install the EdiView Finder software and connect your
camera to your wireless network.
Or you can follow III-3. WPS as an alternative method to connect your
network camera to your wireless network.
Then, you can use the web based management interface to watch a live
stream and further configure the camera if you need (see IV.).
Additionally, you can view the camera's live image using either the cloud ID
(see V.), the 16 channel viewer software (see VI.), or the EdiView smartphone
app (see VII).
III-1. EdiView Finder Network Camera Setup
Ensure your computer is connected to the same router as the
network camera.

III-1-1.

Windows

1.
Insert the included CD into your CD-ROM drive and if the setup utility does
not automatically open, please locate and open the "Autorun.exe" file in
the "Autorun" folder.
2.
Click "Setup Utility" to install the EdiView Finder software utility.
6