Edimax IC-7001W User Manual page 88

Edit
Delete
Sender E-Mail
Address
SMTP Server
SMTP port
SMTP Auth
SMTP
Account
SMTP
Password
OK
Cancel
Select an email address from the 'Recipient E-Mail Address'
box, and click 'Edit' to edit the email address.
Delete the selected email address.
Specify the email address that will appear as the sender.
Specify the IP address or host name of the SMTP server you
wish to use. Most ISPs will only allow their subscribers to
use their SMTP server, if you don't know which SMTP server
you should use, please refer to the settings in your email
software or ask your ISP / network administrator.
Specify the port number of the SMTP server you wish to use
here. By default (and the setting of most of SMTP servers)
it's '25'.
Select 'Enable' if your SMTP server requires authentication,
select 'Disable' if it's not required. If you don't know if your
SMTP server requires authentication, please refer to the
settings in your email software or ask your ISP / network
administrator.
Input the SMTP account (username) of your SMTP server
here. In most cases, it's the same as your POP3 username
(the one you use to receive email). Please refer to the
settings in your email software or ask your ISP / network
administrator if you're not sure about this.
Input the SMTP password of your SMTP server here. In most
cases, it's the same as your POP3 password (the one you
use to receive email). Please refer to the settings in your
email software or ask your ISP / network administrator if
you're not sure about this.
Save settings in this tab.
Discard all settings in this tab.
84