Reset; I-6. Reset - Edimax IC-7001W User Manual

I-6.

Reset

If you experience problems with your network camera, you can reset the
camera back to its factory default settings. This resets all settings back to
default.
1.
Press and hold the WPS button found on the
back panel for at least 10 seconds
2.
Release the button when the orange LED is
flashing quickly.
3.
Wait for the network camera to restart. The
camera is ready when the green LED is on or
flashing.
After reset, the LED will display off If there is no Ethernet
connection to the network camera from a router/access
point/switch.
4