Camera Setup; Iii-1. Installing & Using Ediview Finder; Iii-1-1. Windows - Edimax IC-3116W Quick Installation Manual

III. Camera Setup
Your network camera can be up and running in just a few minutes. First,
please follow the instructions below for Windows or Mac in III-1. Installing &
Using EdiView Finder to install the EdiView Finder software and connect your
camera to your wireless network.
Or you can follow III-2. WPS as an alternative method to connect your
network camera to your wireless network.
Then, you can use the web based management interface to watch a live
stream and further configure the camera if you need (see III-3.).
Additionally, you can view the camera's live image using either the cloud ID
(see III-4.) or the EdiView smartphone app (see III-5).
III-1. Installing & Using EdiView Finder
Ensure your computer is connected to the same router as the
network camera. It is recommended to use a dynamic IP address
for your computer. Static IP users please refer to the user manual
if you encounter difficulties.
III-1-1. Windows
1.
Insert the included CD into your CD-ROM drive and if the setup utility does
not automatically open, please locate and open the "Autorun.exe" file in
the "Autorun" folder.
2.
Click "Setup Utility" to install the EdiView Finder software utility.
8