Edimax IC-7001W User Manual page 74

Hold your mouse cursor over any icon for a description of its function.
Descriptions are also included below:
Item
Video display area
Language
Display layout
Full screen
Scan
PTZ control
Home
Recording
Configure
Playback
Snapshot
Message display
Description
The image of all connected cameras will be displayed
here.
Select a language from this dropdown menu to change
the display language.
Change camera image display layout (Click a layout
icon to change camera display layout). There are 8
kinds of display layouts available.
Click this button to switch to full screen mode (only
display all camera's image), press 'ESC' key to quit full
screen mode.
Click this button and the network camera surveillance
software will switch through the images of all
connected camera automatically. Click this button
once to activate the scan function (scan icon will
become blue ), click again to stop scanning (scan
icon will become white ).
There are 4 directions in the Pan Tilt Zoom (PTZ)
control ring. If the camera you connect to supports
PTZ, you can use the PTZ control ring to change the
direction that the camera faces.
This function is only available for supported cameras.
Click this button to return the camera to 'Home'
(default) position.
This function is only available for supported cameras.
Start video recording.
Software / camera configuration.
Play back a recorded video file.
Take a snapshot of current the camera image.
Displays all system messages.
70