Iv-3-5. Ftp - Edimax IC-7001W User Manual

IV-3-5. FTP
A snapshot image of a detected event can be sent to a designated FTP server.
This function must be enabled in "Motion Detection" settings in the "Events"
menu. Enter the required information about your FTP server below.
FTP Server
User Name
Password
Port
Path
Passive mode
Enter the IP address or host name of the FTP
server.
Enter the user name required by the FTP
server.
Enter the password of the FTP server.
Enter the port number of the FTP server. This
value should be an integer between 1 and
65535. Please don't change this value unless
advised by the FTP server's administrator.
Enter a path (folder) to save files on the FTP
server. If blank, files will be saved in the FTP
server's default root folder.
Enable or disable passive mode according to
your FTP server.
50