Table of Contents
Advertisement
4.2.
Camera Ports
The Camera features two ports and a Reset button.
Antenna connector
The Standard reverse SMA connector is for any antennas with reverse
SMA connector can connect to the Internet Camera.
Power
The Power port is where you can connect the power adapter.
LAN
The LAN port is where you can connect the Ethernet network cable.
Reset
1. If problems occur with your Internet Camera, press the reset button
with a pencil tip (for less than 2 seconds) and the Internet Camera will
reboot itself with your configurations.
2. If problems persist or you experience extreme problems or you forgot
your password, press the reset button for longer than 5 seconds.
The Internet Camera will reset itself to the factory default settings
(warning: your original configurations will be replaced with the factory
default settings).
Power
LAN Port
Jack
Antenna connector
Reset Button
Advertisement
Table of Contents
