Error Reporting - Hitachi HTS541616J9SA00 Specifications

Starting LBA for test span 2
Ending LBA for test span 2
Starting LBA for test span 3
Ending LBA for test span 3
Starting LBA for test span 4
Ending LBA for test span 4
Starting LBA for test span 5
Ending LBA for test span 5
Reserved
Vendor specific
Current LBA under test
Current span under test
Feature flags
Vendor specific
Selective self test pending time
Reserved
Data structure checksum
Figure 94 Selective self-test log data structure

Error Reporting

14.40.8
The following table shows the values returned in the Status and Error Registers when specific
error conditions are encountered by a device.
Error Condition
A S.M.A.R.T. FUNCTION SET command was received
by the device without the required key being loaded into
the LBA High and LBA Mid registers.
A S.M.A.R.T. FUNCTION SET command was received
by the device with a subcommand value in the Features
Register that is either invalid or not supported by this
device.
A S.M.A.R.T. FUNCTION SET command subcommand
other than S.M.A.R.T. ENABLE OPERATIONS was
received by the device while the device was in a
"S.M.A.R.T. disabled" state.
The device is unable to read its Attribute Values or
Attribute Thresholds data structure.
The device is unable to write to its Attribute Values data
structure.
Figure 95 S.M.A.R.T. Error Codes
Travelstar 5K160 (SATA) Hard Disk Drive Specification
8 12A R/W
8 1Ah R/W
8 22h R/W
8 2Ah R/W
8 32h R/W
8 3Ah R/W
8 42h R/W
8 4Ah R/W
256 52h Reserved
154 152h Vendor specific
8 1ECh Read
2 1F4h Read
2 1F6 R/W
4 1F8h Vendor specific
2 1FCh R/W
1 1FEh Reserved
1 1FFh R/W
512
146/167
Status Register
51h
51h
51h
51h
51h
Error Register
04h
04h
04h
10h or 40h
10h or 01h