Hitachi ic35l060avv207-0 - Deskstar 60 GB Hard Drive Specifications page 232

Output Parameters To The Device
Sector Count Current
Sector Count Previous
Sector Number Current
Cylinder Low Current
Cylinder Low Previous
If the feature set associated with the log specified in the Sector Number register is not supported or
enabled, or if the values in the Sector Count, Sector Number or Cylinder Low registers are invalid, the
device shall return command aborted. If the host attempts to write to a read only log address, the device
shall return command aborted.
The number of sectors to be written to the specified log low order, bits (7:0).
The number of sectors to be written to the specified log high orders,
bits (15:8). If the number of sectors is greater than the number indicated in
the Log directory, which is available in Log number zero, the device shall
return command aborted. The log transferred to the device shall be stored
by the device starting at the first sector in the specified log.
The log to be written as described in Figure 47 Log Address Definition. If the
host attempts to write to a read only log address, the device shall return
command aborted.
The first sector of the log to be written low order, bits (7:0).Log Address
Definition
The first sector of the log to be written high order, bits (15:8).Log Address
Definition
Deskstar 180GXP hard disk drive specifications
218