Part Identification Chart - Weslo Momentum R 5.2 Elliptical User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled.
M8 Locknut
(27)–6
M3 x 20mm
Screw (79)–4
M8 x 20mm
Screw (7)–3
M10 Locknut
(32)–6 Washer (8)–10
M4 x 20mm
Screw (93)–6
Screw (45)–2
M8 x 36mm
Bolt (22)–4
M8 x 82mm
Screw (53)–4
M10 x 76mm
Bolt (30)–2
M8 Split M8 Washer
(71)–10
M4 x 20mm M4 x 16mm
Self-tapping Screw (2)–4
M8 x 78mm Bolt (38)–2
5
M10 Washer
(10)–6
M8 x 16mm
Screw (35)–4
M10 x 45mm
Bolt (39)–4