Table of Contents
Advertisement
Model No. 831.21904.0
ELLIPTICAL EXERCISER
Serial No.
User’'s Manual
Write the serial number in the space
above for reference.
Serial Number Decal
(under frame)
•• Assembly
•• Operation
•• Maintenance
•• Part List and Drawing
Sears, Roebuck and Co.
Hoffman Estates, IL 60179
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for Weslo Momentum6.2 Elliptical
Summary of Contents for Weslo Momentum6.2 Elliptical
- Page 1 Model No. 831.21904.0 ELLIPTICAL EXERCISER Serial No. User’’s Manual Write the serial number in the space above for reference. Serial Number Decal (under frame) •• Assembly •• Operation •• Maintenance •• Part List and Drawing Sears, Roebuck and Co. Hoffman Estates, IL 60179 CAUTION Read all precautions and instruc- tions in this manual before using...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . . 2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 4: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new WESLO ® reading this manual, please see the back cover of this MOMENTUM CT 6.2 elliptical. The MOMENTUM CT manual. To help us assist you, note the product model 6.2 elliptical provides a selection of features designed number and serial number before contacting us. -
Page 5: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 6: Assembly
ASSEMBLY •• Assembly requires two persons. •• In addition to the included tool(s), assembly requires the following tools: •• Place all parts in a cleared area and remove the one adjustable wrench packing materials. Do not dispose of the packing materials until you ... - Page 7 3. If there is a cardboard tube (not shown) on the front the Frame (54), remove and discard the attachment screw and the cardboard tube. Set a sturdy piece of packing material under the front of the Frame (54). Have a second person hold the Frame to prevent it from tipping while you complete this step.
- Page 8 5. Attach the Right Pedal Arm Cover (85) to the Right Pedal Arm (75) with an M4 x 20mm Self- tapping Screw (45). Repeat this step on the other side of the elliptical. 6. Orient the Upright (9) and the Lower Upright Cover (83) as shown.
- Page 9 7. Apply a small amount of grease to an M10 x 76mm Bolt (30). Hold the end of the Right Upper Body Leg (80) inside the bracket on the Right Pedal Arm (75). Attach the Right Upper Body Leg (80) to the Right Pedal Arm (75) with the M10 x 76mm Bolt (30), an M10 Washer (10), and an M10 Locknut (32).
- Page 10 9. Orient the Handlebar (4) as shown. Have a second person hold the Handlebar (4) near the Upright (9). Insert the Extension Wire (16) into the Handlebar and pull it out of the top of the Handlebar. Tip: Avoid pinching the wires. Attach the Handlebar (4) to the Upright (9) with three M8 x 20mm Screws (7).
- Page 11 11. Attach a set of Upper Body Covers A and B (88, 89) to the Right Upper Body Arm (15) and the Right Upper Body Leg (80) with two M3 x 20mm Screws (79). Repeat this step on the other side of the elliptical.
- Page 12 13. While a second person holds the Console (1) near the Handlebar (4), connect the console Avoid pinching wires to the Extension Wire (16) and to the Pulse the wires Wires (6). Insert the excess wire into the Console (1) or into the Handlebar (4).
-
Page 13: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO MOVE THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL Due to the size and weight of the elliptical, moving To mount the elliptical, hold the handlebars or the it requires two persons. Stand in front of the elliptical, upper body arms and step onto the pedal that is in the hold the upright, and place one foot against one of the lower position. - Page 14 CONSOLE DIAGRAM HOW TO USE THE MANUAL MODE 1. Turn on the console. To turn on the console, press the On/Reset button or begin pedaling. The entire display will turn on for a moment; the console will then be ready for use. 2.
- Page 15 Calories——This display shows the approximate only the distance pedaled. To select the scan mode number of calories you have burned. again, press the Display button repeatedly until an indicator appears below the word SCAN. Pulse——This display shows your heart rate when you use the handgrip heart rate monitor.
- Page 16 HOW TO USE A QUICK SMART WORKOUT APP The target speed settings for the Target Meter 1. Turn on the console. workout will be shown by the To turn on the console, press the On/Reset button target meter in or begin pedaling. The entire display will turn on for the display.
-
Page 17: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 18: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. Locate the Reed Switch (33). Loosen, but do not Replace any worn parts immediately. remove, the M4 x 20mm Self-tapping Screw (45). Note: For clarity, the left crank disc is shown removed in the To clean the elliptical, use a damp cloth and a small drawing below. -
Page 19: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 20: Part List
PART LIST Model No. 831.21904.0 R1112A Key No. Qty. Description Key No. Qty. Description Console M4 x 20mm Self-tapping Screw M4 x 16mm Screw Left Shield M4 x 20mm Pulse Sensor Screw 5/16" x 25mm Screw Handlebar Left Crank Arm Foam Grip M8 x 14mm Washer Pulse Sensor/Wire... - Page 21 Key No. Qty. Description Key No. Qty. Description Left Upper Body Leg Cover Clamp Right Upper Body Leg Cover M10 x 14mm Washer Flywheel Axle –– Grease Packet M4 x 20mm Screw –– Assembly Tool Tension Spring –– User’’s Manual Note: Specifications are subject to change without notice.
-
Page 22: Exploded Drawing
EXPLODED DRAWING A Model No. 831.21904.0 R1112A... - Page 23 EXPLODED DRAWING B Model No. 831.21904.0 R1112A...
-
Page 24: 90 Day Full Warranty
90 DAY FULL WARRANTY If this Sears Elliptical Exerciser fails due to a defect in material or workmanship within 90 days of the date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement if repair proves impossible). This warranty does not apply when the Elliptical Exerciser is used commercially or for rental purposes.