Weider 9250 User Manual page 8

5. Orient the Weight Tube Bumper (62) so that the
lock holes (see drawing 6) are closer to the bot-
tom. Insert the two Weight Guides into the indi-
cated holes in the Base (4).
Secure the Weight Guides (62) to the Base with
an M10 x 155mm Bolt (60), two M10 Washers
(9), two 15mm Spacers (61), and an M10 Nylon
Locknut (21).
Slide the two Weight Bumpers (19) onto the
Weight Guides (62).
Slide the eleven Weights (25) onto the Weight
Guides (62). Have a second person hold the
Weight Guides whilst the Weights are being
put on. Make sure the pin grooves are on the
side shown.
6. Press the Weight Tube Bumper (72) into the bot-
tom of the Weight Tube (63). Insert the Weight
Tube into the centre hole in the Weights (25).
Make sure the pin on the Weight Tube rests in
the indicated pin groove.
Lubricate the indicated holes in the Top Weight
(56). Slide the Top Weight onto the Weight
Guides (62), with the pin groove on the side
shown.
5
62
25
19
4
21 9
6
56
63
62
72
Lock
Holes
25
8
Pin
Groove
60
9
61
Lubricate
Pin
Groove
Pin
Pin
Groove