Flag Options - Royal Alpha 9180sc Instruction Manual

FLAG OPTIONS

A total of 35 System Programming Options (known as FLAGS) are offered on this cash register. They are preset by the
factory to accommodate the most commonly used selections. Each Flag Option can be changed or updated at any time
as needed. Note: All Flags have been factory preset at "0", except for Flags 15 and 18 which have a default setting of
"1". They only need to be programmed if you wish to change any option from "0" to "1".
The options are as follows:
FLAG NUMBER
1
0 = The Grand Total does not reset after a "Z" Reading.
1 = The Grand Total resets after a "Z" Reading.
2 0 = Subtotal will print on sales receipts when [#/ST/NS] key is depressed.
1 = Subtotal will not print on sales receipts when [#/ST/NS] key is depressed.
3 0 = Tendering of change is not required.
1 = Tendering of change is required.
4 0 = The Date will print as Month-Day-Year.
1 = The Date will print as Day-Month-Year.
5 0 = "Z1" and "Z2" Counter Numbers will not reset after a "Z1" or "Z2" Reading.
1 = "Z1" and "Z2" Counter Numbers will reset after a "Z1" or "Z2" Reading.
6 0 = Tax Rate Amount will print on sales receipts.
1 = Tax Rate Amount will not print on sales receipts.
7 0 = Skips amounts equaling zero on financial reports.
1 = Does not skip amounts equaling zero on financial reports.
8 0 = The Date will print on sales receipts and management reports.
1 = The Date will not print on sales receipts and management reports.
9 0 = The Time will print on sales receipts and management reports.
1 = The Time will not print on sales receipts and management reports.
10
0 = The Transaction Number will reset after a "Z1" Reading.
1 = The Transaction Number will not reset after a "Z1" Reading.
11 0 = The Clerk Name will print on sales receipts.
1 = The Clerk Name will not print on sales receipts.
12 0 = Clerk System inactive.
1 = Clerk System active.
13 0 = USA Tax System.
1 = Canadian Tax System.
2 = VAT Tax System.
14
0 = "Z1/Z2" Counter will print.
1 = "Z1/Z2" Counter will not print.
15 0 = Tax amount will print after the sales total on the sales receipt.
1 = Tax amount will print before the subtotal amount on the sales receipt.
"0" = Represents the option preset by the factory.
"1" = Represents an alternative option.
(Flag Options are continued on the next page)
OPTION NUMBER
38