Quick Start - Royal Alpha 9180sc Instruction Manual

QUICK START

The Quick Start program is designed to help you quickly "get started" with the basics you need to run
your cash register. It covers only very basic programming of the Decimal Point, Rounding, Date,
Time, Tax Rate and Department Status for taxing or non-taxing. Follow the Quick Start straight
through, however, skip any steps which are not required for your business needs. As you follow the
Quick Start Program, the printed information on the receipt tapes may not correspond to the
information you are programming. Once the Quick Start is completed, a program confirmation report
can be taken to review your results. As you go through the Quick Start, if an error tone sounds,
PRESS the [CLEAR] key and continue by repeating the step you are attempting to program.
NOTE: It is not necessary to repeat the entire Quick Start program if you wish to update or
change a step at any time. Therefore, maintain your owner's manual in a safe place for all
future programming.
When referring to the numeric keypad (keys with the numbers 0 through 9), the
numbers will be displayed in parenthesis. For example, press the number (5).
When referring to the other operational keys, they will be shown in brackets. For
example, press the [AMT TEND/TOTAL] key.
IMPORTANT: Read Unpacking Your Cash Register and Set Up (Page 1), Getting To Know Your
Cash Register (Page 2), Control Lock System (Page 4), Keyboard Functions (Pages 5-7), Display
Windows (Page 8), and Paper Roll (Page 9).
FOLLOW THE QUICK START ON THE NEXT PAGE.
13