Schwinn 460 Elliptical Assembly Manual page 9

Step 4: Mast Boot and Arm Pivot Rod
Parts
• Assembly from Step 3
• #4 - Mast Boot (Qty 1)
• #18 - Mast Clip (Qty 1)
• #22 - Arm Pivot Rod (Qty 1)
Note: Install the Mast Boot and Clip to prevent hardware
from falling into the Mast area of the Main
Assembly.
4
Figure 4a
Assembly
4-1 Separate the Mast Boot slit.
4-2 Slide the Mast Boot around the Console Mast from the
back to front (Figure 4a).
4-3 Seat into the plastic shroud (P).
4-4 Push the Mast Clip into the holes in the front of the
Mast Boot (Figure 4b).
4-5 Push the Arm Pivot Rod through the pivot mount (M)
on the Console Mast (Figure 4b).
22
P
7
Assembly Manual
M
Figure 4b
18