Schwinn 460 Elliptical Assembly Manual page 11

Step 5: Swing Arms and Handlebars (cont.)
Note: This step requires two people.
5-4 Put the end of the Handlebar into the top of the Swing Arm
(Figure 5b). Make sure that the bolt holes are aligned.
5-5 Install four M8 x 20 Button Head Bolts, M8 Spring Lock
Washers and M8 Flat Washers (Figure 5b). Tighten the
hardware.
5-6 Repeat Steps 5-4 and 5-5 on the opposite side.
Assembly
6
28
27
24
Figure 5b
Assembly Manual
9
5