Schwinn 460 Elliptical Assembly Manual page 15

Step 9: Attach the Console and Fan to
the Mast
Parts
• Main Assembly from Step 8
• #13 - Console with Fan (Qty 1)
Hardware
• #23 - M5 x 15 Phillips Head Screw (Qty 4)
Tools
• Phillips Screwdriver
Assembly
Note: This step requires two people.
9-1 Hold the Console above the Mast plate and connect
the Main Console wire (W1) to the Console wire (W3).
9-2 Tuck the wire connectors into the Console Mast.
NOTICE: Do not pinch the wires when putting the
9-3 Attach the Console to the Mast with the hardware
shown.
W3
W1
23
Figure 9
13
Assembly Manual
Console on the Console Mast.