Download
Share
Print this page
Schwinn 430 Assembly Manual
  1. Manuals
  2. Brands
  3. Schwinn Manuals
  4. Elliptical Trainer
  5. 430
  6. Assembly manual

Schwinn 430 Assembly Manual

Hide thumbs Also See for 430:

Advertisement

Quick Links

See also: Assembly and Owner's Manual , Service Manual
Do not print this page

Advertisement

loading

Related Manuals for Schwinn 430

Summary of Contents for Schwinn 430

  • Page 1 Do not print this page...
  • Page 2 ©2006. Nautilus, Inc. All Rights Reserved. Schwinn is a registered trademark. Nautilus, Inc., World Headquarters, 16400 SE Nautilus Dr., Vancouver, WA 98683...
  • Page 3 elliptical assembly guide assembly guide 001-6986-070709c...

  • Page 4: Table Of Contents

    Table of Contents Hardware ....................2 Exploded View ..................4 Parts List ....................5 Assembly Instructions ................6 Important Contact Numbers ............... 18 ATTENTIoN! When unpacking the box, please inspect all styrofoam and packaging before discarding. Some parts are packaged on the outside of the styrofoam packaging.
  • Page 5 Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270...
  • Page 6 Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270...

  • Page 7: Exploded View

    EXPLoDED VIEW...

  • Page 8: Parts List

    PARTS LIST Ref. Description MAIN FRAME ASSEMbLy LEFT FooT ASSEMbLy RIgHT FooT ASSEMbLy CoNSoLE HANDLEbAR FRoNT STAbILIzER WATER boTTLE HoLDER REAR STAbILIzER EXTRuSIoN ASSEMbLy EXTRuSIoN HANDLEbAR ASSEMbLy CoNSoLE MAST ARM PIVoT RoD LoWER LEFT HANDLEbAR LEFT uPPER HANDLEbAR RIgHT uPPER HANDLEbAR RIgHT LoWER HANDLEbAR LEFT LEg RIgHT LEg...

  • Page 9: Assembly Instructions

    basic Assembly Principles Here are a few basic tips that will aid in the assembly process . by using these principles, you can simplify each process and save yourself extra time and effort. 1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step.

  • Page 10: Hardware

    Step 1 Install Rear Stabilizer and Extrusion Handlebar parts: • two extrusion assemblies (ref. H) • rear stabilizer (ref. g ) • Extrusion Handlebar Assembly (Ref. I) tools: • Supplied Allen Wrench 1-1 Attach, but do not tighten, the Extrusion Assemblies (Ref H) to the Rear Stabilizer Assembly (Ref G) using twelve M8x15L button head (Ref 1) twelve M8 washers locking (Ref 5) and twelve M8 washers regular (Ref 3).
  • Page 11 Step 2 Install front stabilizer and Extrusion Assembly parts: • Front stabilizer (ref e) • Extrusion Assembly (From step 1) • Main Unit (Ref A) tools: • Supplied Allen Wrench 2-1 Attach the Front Stabilizer (Ref E) to the Main Unit (Ref A) using two M8x25 flat head screws (Ref 2) and completely tighten the hardware.
  • Page 12 Step 3 Install Console Mast parts: • console mast (ref K) • Main Unit tools: • Supplied Allen Wrench 3-1 Connect the wire harness from the Main Unit to the wire harness in the Console Mast. 3-2 Slide the Console Mast (Ref K) down onto the Main Unit and secure using six M8x15L button head (Ref 1), six M8 washers regular (Ref 3) and six M8 washers locking (Ref 5).
  • Page 13 Step 4 Install Console Handlebar parts: • Console Handlebar (Ref D) tools: • Supplied Phillips Head Screwdriver 4-1 Feed the Wire Harness (Ref W1) from the Mast (Ref K) and the Contact Heart Rate Wire (Ref W2) from the Console Handlebar through the hole in the Console Handlebar (Ref D).
  • Page 14 Step 5 Install Console parts: • console (ref u) tools: • Supplied Phillips Head Screwdriver NOTE: Before installing the console, make sure the toggle switch on the back of the Console (beside wire connectors) is set to EP. 5-1 Remove the four M5x10 phillps screws (Ref 9) from the back of the console.
  • Page 15 Step 6 Install Right and Left leg parts: • Right Leg (Ref R) • Left Leg (Ref S) tools: • Supplied Combo Wrench 6-1 Attach the Right leg (Ref S), marked with an “R” sticker that can be removed, to the post on the Crank (Ref C1) using one M8x20L hex head thread lock (Ref 10) one M8 washer locking (Ref 5) and one M8 washer wide (Ref 4).
  • Page 16 Step 7 Install Right and Left Lower Handlebars parts: • Arm Pivot Rod (Ref L) • Right Lower Handlebar (Ref Q) • Left Lower Handlebar (Ref M) tools: • 2 Supplied Combo Wrenches 7-1 Slide the Arm Pivot Rod (Ref L) through the Console Mast (ref K).
  • Page 17 Step 8 Install Right and Left Foot Assembly parts: • Foot Mount Plate Qty.2 (RefT) • Right Foot Assembly (Ref C) • Left Foot Assembly (Ref B) • Arm Cotter Pin (Ref N) tools: • Supplied Allen Wrench 8-1 Slide the shaft under the Left Foot Assembly into the Pivot (Ref P1) on the Left Leg Assembly.
  • Page 18 Step 9 Install Upper Handlebars parts: • Right Upper Handlebar (Ref P) • Left Upper Handlebar (Ref O) tools: • Supplied Allen Wrench 9-1 Slide the Upper Left Handlebar (Ref O) into the Lower Left Handlebar and secure using four M8x15l button head (Ref 1) four M8 washers regular (Ref 3) and four M8 washers locking (ref 5).

  • Page 19: Install Water Bottle Holder/Ac Adapter

    Step 10 Install Water Bottle Holder and AC Adapter parts: • Water Bottle Holder (Ref F) • AC Adapter (Ref W) tools: • Supplied Phillips Screwdriver 10-1 Align the Water Bottle Holder components (Ref F) with the Mast as shown and secure using two M5x20 phillips head (Ref 7). 10-2 Connect the AC Adapter (Ref W) to the unit as shown.
  • Page 20 Assembly is complete! Please reference the Owner’s Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines.

  • Page 21: Important Contact Numbers

    IMPoRTANT CoNTACT NuMbERS If you need assistance, please have both the serial number of your machine and the date of purchase available when you contact the appropriate Nauti- lus office listed below. OFFices iN tHe uNited states: iNterNatiONal OFFices: E-mail: cstech@nautilus.com For technical assistance and a list of distributors in your area, please call or fax •...

This manual is also suitable for:

430 elliptical 2007 model