Regency Ceiling Fans Akina Owner's Manual page 4

u y
npaCking Our
1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the
fan should be returned in original packing. Remove all parts and hardware. Do not lay motor housing on its side, or the
decorative housing may shift, be bent or damaged.
2. Examine all parts. You should have the following:
1
2
3
9
1. Hanging bracket
2. Ceiling canopy
3. Downrod/ball assembly
4. Decorative collar cover
5. Fan housing with motor (Remove and discard rubber shipping supports around motor, if included on your
fan. Save screws.)
6. Detachable receiver housing
7. Blade arms (5)
8. Fan blades (5) (Packed in separate box.)
9. Bracket hardware (wood screws, washers, wire nuts)
10. Blade arm to motor screws (10)
11. Blade arm to blade screws, w/washers (15)
12. Downrod pin and cotter pin
13. Remote control transmitter and receiver w/wall holster
14. Balance kit
15. Light bulbs (E12, 25W x 4)
NOTE: Design of parts shown above may look slightly different for your specific model of fan.
F
an
10 11 12
4
5
6
LIGHT
FAN/OFF FOR/REV
HI MED LOW
13
3
7
8
14
5GM
5GM
15