Regency Ceiling Fans Akina Owner's Manual page 11

a l
ttaChing ight
l K I
Ight It nStallatIon
1. Attach the light kit base using the quick connects. Black wire to black wire, and white wire to white wire (Fig. 1).
2. Remove one screw from the motor light kit mounting area (Fig. 1).
3. Lift light kit base up to fan motor. Insert the screws from the motor into the key hole on the light kit base and rotate
until it locks in place. Then tighten the two loose screws and reinsert the third screw and tighten all the way. (Fig. 1).
4. Screw the three E12 candelabra light bulbs into the sockets (Fig. 2).
5. Attach globe to light kit base using the four light kit screws (Fig. 3).
LIght Kit Base
F . 1
ig
Socket
F . 2
ig
k
it
Fan Motor
E12 Bulb
Quick Connects
Screw
Light Kit
Base
F . 3
ig
9
Screw
Globe