Setting Monitored Printers; Setting For The Usb Connection - Epson AcuLaser C8600 Reference Manual

Setting Monitored Printers

You can use Monitored Printers utility to change the type of
printers that EPSON Status Monitor 3 will monitor. When you
install EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup.
1. Click Start, point to Programs, point to EPSON Printers, then
click the Monitored printers.
2. Clear the check box of the printers which are not monitored.
3. Click OK to accept the setting.

Setting for the USB Connection

The USB interface that comes with your printer complies with
Microsoft Plug and Play (PnP) USB specifications.
Using the Printer Software with Windows
3
3
3
3
3
3
3
3
3
3
3
3
101