Setting An Ip Address On The Printer's Control Panel (Large Format Inkjet Printers) - Epson printer Network Manual

Item
IP*
SM*
GW*
NetWare*
AppleTalk*
MS Network*
Bonjour*
AUX Init*
Buffer Size*
* Available only whenOn is selected as the AUX I/F setting.
AUX I/F
Allows you to activate or deactivate the AUX interface when an optional interface card is installed.
Buffer Size
Determines the amount of memory to be used for receiving data and printing data. If Maximum is
selected, more memory is allocated for receiving data. If Minimum is selected, more memory is
allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn
it back on. Or, you can perform a Reset All operation, as explained in "Reset Menu" in the User's
Guide.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you reset
the printer.
Setting an IP Address on the Printer's Control Panel (Large Format Inkjet
Printers)
After connecting the printer to the network, you need to set the IP address for the network interface.
Settings
0.0.0.0 to 255.255.255.254
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
On, Off
-
Normal, Maximum, Minimum
EPSON Network Guide
Tips for Administrator 130