I239X Menu - Epson AcuLaser C8600 Reference Manual

Auto CR
Specifies whether the printer performs a
carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If this setting is
off, the printer does not print any characters beyond the right
margin and does not perform any line wrapping until it receives
a carriage-return character. This function is handled
automatically by most applications.
Auto LF
If you select
(LF) command with each carriage-return (CR). If
line-feed command is sent with each carriage-return. Select
your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the
printer commands. If you select
high, and if you select
If you select
by automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. This mode will reduce the size of the image being printed,
and may also cause some distortion when printing bit image
graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.

I239X Menu

The I239X mode emulates IBM
, the printer does not send an automatic line-feed
, the bit image density is low.
, the printer converts bit images to bar codes
Functions of the Control Panel
, the bit image density is
®
2390/2391 Plus commands.
is selected, a
if
203
6
6
6
6
6
6
6
6
6
6
6
6