Epson AcuLaser C8600 Reference Manual page 188

Auto Eject Page
Specifies whether or not to eject paper when the limit specified in
the Time Out setting is reached. The default is
paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select
this item on, the printer keeps printing even if the image size
exceeds the printable area for the specified paper size. This may
cause smudges because of the toner that is not transferred onto
the paper properly. When this item is turned off, the printer stops
printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues
printing after a certain period of time when one of the following
errors occurs: Paper Set, Print Overrun, or Mem Overflow. When
this option is off, you must press the Start/Stop button to resume
printing.
Page Protect
Allocates additional printer memory for printing data, as
opposed to receiving it. You may need to turn this setting on if
you are printing a very complex page. If a
message appears on the LCD panel during printing, turn this
setting on and reprint your data. This reduces the amount of
memory reserved for receiving data so your computer may take
longer to send the print job, but it will allow you to print complex
jobs. Page Protect usually works best when
will need to increase your printer's memory if memory errors
continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer's memory,
which causes any downloaded fonts to be deleted.
186 Functions of the Control Panel
, which means
. When you turn
error
is selected. You