10. Turn the large lever 90 degrees clockwise.
11. Close the front cover.
Waste Toner Collector
Prepare a new waste toner collector for replacement when you
get a message informing you to do so. The waste toner collector
is sold as part of the photoconductor unit because it usually needs
replacement at the same time as the photoconductor unit.
However, the waste toner collector is also sold individually as
sometimes you may need to replace the waste toner collector
separately depending on use.
Handling precautions
Always pay attention to the following handling precautions
before replacing the waste toner collector.
Do not reuse toner found in the waste toner collector.
Replacing Consumable Products
8
8
8
8
8
8
8
8
8
8
8
8
267