Epson AcuLaser C8600 Reference Manual page 327

Optional RAM Error
The optional memory module may be corrupted or incorrect.
Replace it with a new one.
Outbin Select Error
Printouts are not output to the specified output tray, but to
another tray due to a printing restriction.
Paper Out XXX YYY
There is no paper in the specified paper source (XXX). Load paper
of the indicated size (YYY) into the paper source.
Paper Set XXX YYY
The paper loaded in the specified paper source (XXX) does not
match the required paper size (YYY). Replace the loaded paper
with the correct size paper and press the Start/Stop button to
resume printing. Or press the
print job.
If you press the Start/Stop button without replacing the paper,
the printer will print on the loaded paper even though it does not
match the required size.
Photocondutr Trouble
The installed photoconductor unit has a problem. Turn off the
printer, remove the photoconductor unit and install a new
photoconductor unit. See "Replacing the photoconductor unit"
on page 263.
Job Cancel button to cancel the
Troubleshooting
10
10
10
10
10
10
10
10
10
10
10
10
325