Using Hdd Form Overlay - Epson AcuLaser C8600 Reference Manual

Different printer settings overlay data
The overlay data is made with the current printer settings (such
as Resolution: 600 dpi). If you want to make the same overlay with
different printer settings (such as 300 dpi), follow the instructions
below.
1. Re-access the printer driver as described in step 2 in Appendix
, "Creating an overlay,".
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer like step 12 in Appendix , "Creating an overlay,".
This setting is available only for Form Name data.

Using HDD form overlay

This function enables faster printing with form overlay data. All
users can use the form data registered in the optional Hard Disk
Drive installed in the printer though only an administrator can
resister or delete the form data in the Hard Disk Drive.
Note:
This function is not available when the Color setting is set to Black
in the printer driver's Basic Settings menu.
This function is not available if the optional Hard Disk Drive is not
installed.
Use this function by inputting the registered form name after
printing the Print List.
When the document's resolution, paper size or paper orientation
settings are different from the form overlay data that you use, you
cannot print the document with the form overlay data.
This function is available in the ESC/Page Color mode.
72 Using the Printer Software with Windows