Chapter 5 Maintenance Mode; Maintenance Mode; Maintenance Mode Setting Procedure - Epson Stylus Pro 4400 Reference Manual

Chapter 5

Maintenance Mode

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter the maintenance mode and
how to make settings with the buttons on the control panel.
To make the maintenance mode settings, follow the steps below.
Note:
Press the Paper Source
1. Enters the maintenance mode
Confirm the printer is turned off first. While pressing and
holding the Pause
turn on the printer.
2. Select an item
Press the Paper Feed
desired item.
3. Set the item
Press the Menu
parameter is displayed on the LCD.
4. Select a parameter
Press the Paper Feed
parameter for the item.
5. Set the parameter
Press the Menu
If the parameter is for execution only, press the Menu
button to execute the function for the item.
258
Maintenance Mode
button to return to the previous step.
button, press the Power
or Paper Feed
button to enter the selected item. The first
or Paper Feed
button to store the selected parameter.
button to
button to select a
button to select a