Performing Borderless Printing - Epson Stylus Pro 4400 Reference Manual

Performing Borderless Printing

When selecting the paper size with Borderless (Auto Expand),
Borderless (Auto Expand, Maximum), Borderless (Retain
Size), Borderless (Retain Size, Maximum), Roll Paper -
Borderless (Auto Expand), Roll Paper - Borderless (Retain
Size), or Roll Paper - Borderless Banner as the Paper Size in the
Page Setup dialog, Epson recommends the following media
conditions.
Accommodate media width:
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm
Note:
❏ You cannot perform borderless printing on cut-sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches (203.2 inch)
or 420 mm (A2), attach the spacer to the spindle. See "Attaching
the spacer to the spindle" on page 267.
❏ If your application has margin settings, make sure they are set to
zero before printing.
212
Printing with Mac OS X