Epson Stylus Pro 4400 Reference Manual page 67

3. Specify the edge of the paper where binding will be placed.
You can choose Left, Top, or Right.
4. Specify the width of the binding margin, using the Binding
Margin text box. You can specify any width from 3 to 30 mm.
Note:
The actual binding margin may vary depending on the settings
specified in your application. We recommend that you test the print
quality before printing the entire job.
5. Click OK to return to the Layout menu, and then click OK to
save your settings.
6. Make sure paper is loaded, and then send a print job from
your application. Instructions for generating the
even-numbered pages will be displayed while the
odd-numbered pages are output.
7. Follow the on-screen instructions and reload the paper.
Note:
❏ The paper may curl during printing due to the amount of ink
used. If this problem occurs, slightly curl the sheets in the
opposite direction prior to reloading them into the printer.
❏ Align the sheet stack by tapping its edges against a hard, flat
surface prior to reloading the stack into the printer.
❏ Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
❏ In the event of a paper jam, see "Clearing paper jams" on page
347.
8. Once the paper is reloaded, click Resume to print the
even-numbered pages.
Printing with Windows
1
1
1
1
1
1
1
1
1
1
1
1
67