Epson Stylus Pro 4400 Reference Manual page 51

3. Choose Auto Expand or Retain Size, and the amount of
enlargement.
Auto Expand
Retain Size
Amount of
Enlargement
4. Make the Auto Cut setting. For details, see "Making the Auto
Cut setting" on page 52.
5. Click OK.
6. Start printing your data from your application.
Select this setting if you want to enlarge the size of
print data automatically and print with no margins.
You can choose the amount of enlargement by
moving the slider.
Note:
Enlarged areas that exceed the paper size will not
be printed on the paper.
Select this setting if you do not want to change the
ratio of your print data.
If you select this setting, you need to enlarge your
image data to exceed the paper width, to avoid
unprinted areas appearing along the left and right
edges. Enlarging 3 mm in both the left and right
directions is recommended, using the application
that created the data.
To use this feature, see "Making the Paper Size
setting" on page 55.
When you select Auto Expand, the slider becomes
available. Using the slider, you can control the
amount of the image that extends beyond the
edges of the paper during borderless printing.
For most print jobs, Standard is recommended in
order to eliminate margins on all sides of the paper.
In a very humid environment, the width of paper
may expand due to moisture absorption. In this
case, move the slider to Max to eliminate margins
around the image. If Max is selected, the center of
the image may move about 1 mm to the right.
Moving the slider towards Min decreases the
amount of the image enlargement; however, as this
amount decreases, margins may appear on one or
more sides of the paper.
Printing with Windows
1
1
1
1
1
1
1
1
1
1
1
1
51