Epson Stylus Pro 4400 Reference Manual page 323

RELOAD PAPER
INSERT DEEPLY
NOT STRAIGHT
RELOAD
PAPER NOT
STRAIGHT
PAPER NOT CUT
COMMAND
ERROR
Cut sheet media
inserted from the front
manual feed slot is not
inserted deep enough.
Cut sheet media is not
loaded straight, and
needs to be aligned.
The paper is not loaded
straight.
Paper is not cut correctly
when Roll Auto Cut On
is selected.
Damaged data is sent to
the printer.
The printer receives data
with a wrong command.
The installed printer
driver is not correct for
the printer.
Insert the paper
deeper. See "Loading
paper into the front
manual feed slot" on
page 287.
Load the cut sheet
media correctly. See
"Loading cut-sheet
media" on page 277.
Load paper straight.
Open the top cover
and remove the uncut
paper. If RELOAD
PAPER appears on the
LCD, reload paper.
The paper cutter may
not be installed
correctly. See
"Replacing the Paper
Cutter" on page 310.
Paper cutter may be
blunt. Replace the
paper cutter. See
"Replacing the Paper
Cutter" on page 310.
Stop printing, and press
the Pause button for 3
seconds.
Stop printing, and press
the Pause button for 3
seconds. Then make
sure that the installed
printer driver is correct
for the printer.
Problem Solver
8
8
8
8
8
8
8
8
8
8
8
8
323