Epson Stylus Pro 4400 Reference Manual page 127

Mode Description
Platen Gap Platen Gap is the height from the media loaded in the
printer to the print head. By adjusting this parameter, you
may produce better print quality. This is set automatically
according to the Paper Thickness setting specified.
Note:
Setting Platen Gap to Narrow may produce better print
quality, but make sure the media does not wrinkle or
touch the print head; otherwise, printed data or the print
head surface may be damaged. Use Wider or Wide in
such case.
Eject Roller Select the Eject Roller Type that best fits your media.
Type
Auto:
The printer selects the most appropriate setting
automatically. When you use Epson special media,
usually select this setting.
Starwheel-Sheet:
If you want to print on cut-sheet paper that is non-Epson
special media, select this setting.
Starwheel-Roll Curled:
If you want to print on strongly curled roll paper that is
non-Epson special media, select this setting.
No Roller-Roll Normal:
If you want to print on roll paper that is non-Epson special
media, select this setting.
Printing with Mac OS 9.x
2
2
2
2
2
2
2
2
2
2
2
2
127