Epson Stylus Pro 4400 Reference Manual page 255

13. PPR FEED ADJ appears. Press the Paper Feed
Feed
the Menu
14. EJECT ROLLER appears. Select AUTO, SHEET, ROLL CURLED, or
ROLL NORMAL, and then press the Menu
15. DRYING TIME appears. Press the Paper Feed
Feed
the Menu
16. SUCTION appears. Press the Paper Feed
button to select STANDARD, -1, -2, -3, or -4.
17. M/W ADJ appears. Press the Paper Feed
button to adjust MicroWeave. Increase the value to give
priority to the print speed, or decrease it to give priority to the
print quality.
18. Press the Menu
Selecting the registered settings
To select the registered settings, follow the steps below.
1. Press the Menu
2. Press the Paper Feed
CUSTOM PAPER, and then press the Menu
3. Press the Paper Feed
PAPER NUMBER, and then press the Menu
4. Press the Paper Feed
the number registered that you want to use. If you select
STANDARD, the printer prints data according to the driver
settings. If you select No. X, the control panel settings override
the driver settings.
button to set the paper feed amount, and then press
button.
button to select the time in seconds, and then press
button.
button to save the selected value.
button to enter the SelecType mode.
or Paper Feed
or Paper Feed
or Paper Feed
or Paper
button.
or Paper
or Paper Feed
or Paper Feed
button to display
button.
button to display
button.
button to select
The Control Panel
4
4
4
4
4
4
4
4
4
4
4
4
255