Platen Gap - Epson Stylus Pro 4400 Reference Manual

PLATEN GAP

You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that printed
images are smeared, select WIDE or WIDER. Select NARROW for
printing on thin paper, or WIDEST for printing on thick paper.
PAGE LINE
You can select whether to print the page line (line along which to
cut off) on roll paper. Select ON if you want to print the page line,
or OFF otherwise.
This operation changes according to the Auto Cut settings.
Paper Source
Roll Auto Cut On
Roll Auto Cut On
Roll Auto Cut Off
Roll Auto Cut Off
Note:
When Sheet
236
The Control Panel
Print Page Line
On
Off
On
Off
is selected as the paper source, this setting is not available.
Printer's Operation
Prints a page line on the right
side only, and cuts paper
automatically after the print
job.
Does not print any page lines,
and cuts paper automatically
after the print job.
Prints page lines on the right
side and below the data, but
does not cut paper
automatically after the print
job.
Does not print any page lines
and does not cut paper.